Epoxy Flooring Sandy, UT Garage Floors on 1970s–90s Slabs
Sandy, Utah boomed in the 1970s, and many of its garage slabs now need grinding and repair before a new epoxy floor goes down.
Garage Floors From Sandy's 1970s Boom
Sandy was incorporated in 1893, but most of its houses are far younger: the city grew from about 6,400 people in 1970 to more than 52,000 by 1980. The 1970s are still its biggest building decade, followed by the 1980s and '90s. That makes Sandy a city of garage floors due for a refresh, plus basements and interior rooms and commercial floors for local shops and offices.
Most of those slabs are now 30 to 50 years old. Years of de-icer slush, oil drips and summer heat leave stains, pitting and hairline cracks, and the concrete just inside the door is often the first to flake. We look at all of it during a free visit, check the slab for moisture, go over colors and quote the job in person.
Then the work: every garage floor is diamond ground to clean, open concrete, cracks and joints are filled, and the system is matched to the room, usually a flake floor with a UV-resistant topcoat for a garage. Our Salt Lake City epoxy cost guide explains what sets the price.
Get a Free Quote
Samples, a tape measure and a plan. At a Sandy estimate we go over flake, metallic and solid colors before you choose.
What a Sandy Floor Comes With
A free visit, prep that suits an older slab, and no pressure to decide.
Free
We Price It in Person
Every Sandy estimate happens at the property: the installer looks at the slab, goes over finishes and quotes the job in person.
2 days
Most Garages in About Two Days
Most garage floors are installed over about two days. We confirm the schedule when you book and tell you when you can park on the new floor.
Business
Floors for Sandy Businesses
Retail and showroom floors, restaurant kitchens, auto shops and storage space. Commercial systems include urethane cement, and every business floor is quoted per project after a site visit.
Checked
A Moisture Check Before Coating
Before anything is mixed, the slab gets a moisture check. If a floor isn't ready, you hear it from us before you pay anything.
Priced
Your Floor, Your Number
Square footage, slab condition, repairs and the finish you pick all move the number, so it is set at the visit.
Read the cost guide →24/7
Call Any Time
Our line at (801) 618-0565 is answered 24/7. Estimate visits are booked on weekdays.
How a Sandy Floor Goes In
Five steps, the first one free. NOAA's airport normals put July highs near 94°F, in very dry air, so each coat is scheduled around the slab temperature and the product's instructions.
Estimate at Your Property
The installer walks the floor looking for cracks, pitting, oil stains and old coatings, takes measurements, goes over flake, metallic and solid-color options and quotes the job. No pressure and no obligation. Book a visit.
Diamond Grinding, Then a Moisture Check
A diamond grinder cuts away the worn surface and anything painted or sealed on top of it, leaving open, clean concrete. Then the slab is checked for moisture before we pick the base coat.
Filling Cracks & Joints
Cracks, pitted spots and control joints are filled and ground level. On a slab poured in the 1970s or '80s, a crack that is still moving gets pointed out before we coat, because no coating stops the concrete under it from shifting.
Color, Flake & Topcoat
The base coat goes on with your flake, metallic or solid color, then the clear topcoat in the sheen you chose: matte, semi-gloss or high gloss. For a business, we plan the work around your opening hours.
Cure & Handover
Most garage installs run over about two days from start to finish. The installer walks the finished floor with you and goes over care and drive-on timing at handover.
Your Sandy Estimate Is Free.
We price the floor only after seeing it, and there is no obligation while you decide.
Sandy Floors We Coat
Homes first, businesses too, all with the same diamond-ground prep.
Garage Epoxy
Garages on Sandy's 1970s, '80s and '90s streets, from compact stalls to three-car bays. A flake floor with a UV-resistant topcoat cleans up fast after winter slush.
Learn about garage epoxy →
Residential Interior
Basements, home gyms, storage rooms and workshops. Seamless and easy to mop; a basement slab gets a moisture check before we suggest a system.
Learn about residential epoxy →
Commercial & Retail
Retail, showroom and office floors across Sandy, plus restaurant kitchens. Flake or solid color, with slip-resistant additives at entrances.
Learn about commercial epoxy →
Industrial & Warehouse
Warehouses, auto shops and storage buildings across Salt Lake County. Heavy-duty epoxy or urethane cement, matched to forklifts, chemicals and wet areas.
Learn about industrial epoxy →
Repair & Maintenance
Worn topcoats, failed DIY kits and old paint. Old coatings come off by diamond grinding or shot blasting, and we tell you honestly whether a recoat is enough.
Learn about repair →Not Sure Which You Need?
Tell us the room and roughly how big it is, and we’ll book a free on-site look.
Call (801) 618-0565 →Sandy Finish Options
Pick the look, then the grip and the sheen.
What a Sandy Garage Floor Faces
Sandy gets the valley's full range: freezing nights, de-icer slush, hot dry summers and strong sun. Here's what good prep buys you.
Salt and Slush
Magnesium-based de-icers ride in on tires and collect on concrete, and freezing can make bare concrete flake at the surface. A coated floor keeps the salt on top, where it rinses off.
Oil, Fluids & Spills
Motor oil, antifreeze, cleaners and coffee stay on a sealed surface and wipe up instead of staining the concrete.
Strong Sun
At roughly 4,200 feet, the valley gets stronger UV than places at sea level. Flake floors finish with a UV-resistant protective topcoat.
Everyday Wear
Carts, chairs, bikes and dropped tools. A coating anchored to diamond-ground concrete holds up to everyday traffic in a home or a store.
Moisture First
Every slab gets a moisture check before coating, and if there's a water problem, we tell you to fix it first.
Easy to Clean & Maintain
A squeegee for winter slush in the garage, a dust mop for a shop floor. No grout lines and no open pores for stains to sink into.
Rated 4.9 stars on Google
Three of our Google reviews, copied word for word.
"Cheers to today! My garage floor was recently redone by Ascent Epoxy Salt Lake City. These guys are awesome, man! They completed the task quickly and amicably. Right now, my garage appears brand-new. Go to their website to learn more. You won't be sorry!"
"I love my new garage floor epoxy. The whole process was painless and the floor looks amazing."
"I had been looking for a good epoxy flooring company in Salt Lake City and this company was the one that I finally went with. They were honest, knowledgeable and had the best price. The installation was quick and they left the place clean."
Epoxy Flooring FAQs — Sandy
Cost, 1970s slabs, polyaspartic and business floors.
Yes — all of Sandy, Utah: the 84070 and 84094 ZIP codes and the Sandy parts of 84093 and 84092. We cover the rest of Salt Lake County too. Call (801) 618-0565 for a free estimate.
It depends on the floor, so every Sandy job is priced after a free on-site visit. Size, slab condition, crack repair, the system and the finish all change the number, and commercial floors are quoted per project. Call (801) 618-0565 or request a free estimate to book that visit; the exact price comes with no obligation, and our Salt Lake City cost guide has more detail.
Yes, polyaspartic systems are available alongside our epoxy floors. At the estimate we explain the options for your space and recommend one; most garages get a flake system with a UV-resistant topcoat.
No. A slab that age usually needs grinding and some crack repair first. We spot that at the estimate, so it is part of the quote.
Yes, when the slab is prepared properly. The airport records about 52 inches of snow in a normal year, de-icer slush comes home on every car, and summers are hot and dry. Diamond grinding, crack repair and a sealed, UV-resistant topcoat handle all of it.
Yes. We coat retail, showroom, office, restaurant and storage floors, with slip-resistant additives where people need extra grip. Call (801) 618-0565 to set up a site visit.
Yes. The slab gets a moisture check first, and the price comes after a free on-site visit. A coated basement floor is easy to clean, but a coating doesn't waterproof a basement.
Preview a Sandy floor before we visit.
Try finishes on a floor like yours and get a typical Salt Lake County price range with your free-estimate request.
Open Floor Studio →